Converts the Tamiya plastic decks to nice looking RC cars with Yeah Racing Option Parts.
Yeah Racing High accuracy CNC machined aluminum upgrades hop ups for Tamiya RC Kits, TT01, TT01E, TT02, TT02B, CC01, CC02, M05, M06, M07, M08, BBX, BB01, TC01, TA05, TRF, XV01, WR02, GF01, F104, DF03 & more
-120x120.jpg)
Model: TACC-009BU
Yeah Racing Aluminum Steering Knuckle Blue For Tamiya CC01 #TACC-009BU
Description:
Aluminum steering knuckles provides an increased strength over the original plastic pieces. Comes with ball bearings which ensures full drivetrain efficency!
Manual:..
Model: TACC-023BK
Description:Aluminum steering knuckles for Tamiya's CC-02, increasing durability whilst not being too heavy! Kingpin screws are also included for smooth steering action!..
Model: TACC-023BU
Description:Aluminum steering knuckles for Tamiya's CC-02, increasing durability whilst not being too heavy! Kingpin screws are also included for smooth steering action!..
Model: TAMB-007BU
Description:Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!..
Model: TAMB-003BU
Description:
Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!..
Model: TXV2-006BU
Description:Aluminum stiffener for Tamiya's XV-02, reinforcing the area between the shock tower and steering for a more responsive steering!..
Model: TABB-004BU
Description:Ball raced aluminum steering rack for a more smooth and direct steering response!..
Model: TASW-007BU
Yeah Racing Aluminum Steering Set for Tamiya SW-01 Blue #TASW-007BU
Description:
Aluminum steering rack for Tamiya's SW-01, offering more a more direct steering feel compared to the plastic part. Removes unwanted play and smoothens out the steering due to the bearings incorporated into the system..
Model: TATT-042BU
Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with the plastic insert pre-installed suspension parts! O-ring installed drop screw holes which eliminates the old problem of loosening dro..
Model: TATT-042RD
Description: Aluminum upgrade parts for the essential parts of your Tamiya TT-01E! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with this ball bearing raced steering rack!..
Model: TXV2-007BU
Description:Aluminum ball-raced steering rack set for Tamiya's XV-02, increasing steering response and removing unwanted play...
Model: TAMC-006BU
Yeah Racing Aluminum Steering Set w/ Ball Bearing For Tamiya M05 M06 #TAMC-006BU
Description:
This is Yeah Racing Aluminum Steering Set w/ Ball Bearing For Tamiya M05 M06. The hard composite material offers both higher stiffness and added durability. It allows for greater race precision on high tra..
Model: TXV2-014BU
Description:Aluminum suspension mount giving better suspension accuracy removing slop from the plastic original part...
Model: TAXV-011BU
Description:Get better suspension mounting with this aluminum suspension compared to the plastic which can warp during installation or hard cornering. Note: XV-01 TC owners will need to purchase suspension ball separately...
Model: TATT-041BU
Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with the plastic insert pre-installed suspension parts! O-ring installed drop screw holes which eliminates the old problem of loosening dro..
Model: TATT-041RD
Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with the plastic insert pre-installed suspension parts! O-ring installed drop screw holes which eliminates the old problem of loosening dro..
Model: TAMB-002BU
Description:Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!..
Model: TATT-009BU
Yeah Racing Aluminum Track Width Adjustable Front Lower Suspension Arm for TATT-S03 (Tamiya TT02 RWD Blue) #TATT-009BU
Description:
RWD Drift orientated suspension arms to be used with the Yeah Racing RWD drift conversion kit or the TT02D if you would like more adjust-ability than the stock arms!
..
Model: TATT-047BU
Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with the plastic insert pre-installed suspension parts! Smoother cornering performance and durability when compared to the stock dog bone s..
Model: TATT-047RD
Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with the plastic insert pre-installed suspension parts! Smoother cornering performance and durability when compared to the stock dog bone s..
Model: TAMC-021BU
Yeah Racing Aluminum Universal Swing Shaft 33mm For TAMC-S07 #TAMC-021BU
Description:
This is Yeah Racing 7075 Aluminum Universal Swing Shaft 33mm For Yeah Racing's MF01X upgrade package: TAMC-S07. These universal swing shafts are made from durable, high quality hardened 7075 Aluminum.Advise : use ..
Model: TAMB-011BU
Description:Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!..
Model: TACC-018BU
Description:Upgrade the upper links on your Tamiya CC02 to aluminum for less link flex which improves handling and more predictability whilst navigating treacherous terrain!..
Model: TT02-010BU
Yeah Racing Aluminum Upper Suspension Mount For Tamiya TT02 #TT02-010BU
Description:
The Yeah Racing aluminum upper suspension mounts replace the kit-standard plastic mount. Beside using quality aluminum to enhance smoothness and durability, this Mount is precisely machined to have minimum possible..
Model: TAWR-011BU
Yeah Racing Aluminum Wheel Cap Cover For Tamiya WR-02CB Blue #TAWR-011BU
Description:
Aluminum wheel caps for your Tamiya WR-02 CB wheels to add a metallic look to your rig!..
Model: YA-0705RD
Description:Adjust trackwidth easily with these aluminum shims, simply put these on the hexes before putting on wheel. Made from aluminum means these will not deform when installing wheel..
Model: YA-0705BK
Description:Adjust trackwidth easily with these aluminum shims, simply put these on the hexes before putting on wheel. Made from aluminum means these will not deform when installing wheel..
Model: YA-0705BU
Description:Adjust trackwidth easily with these aluminum shims, simply put these on the hexes before putting on wheel. Made from aluminum means these will not deform when installing wheel..
Model: TATT-003BU
Yeah Racing Ball Bearing Aluminum C-Hub 6 Degree Set For Tamiya TT02B #TATT-003BU
Description:
Increase steering smoothness and precision with this aluminum bearing c hub set! Also made better is the steering response when compared to the original plastic part as aluminum will be harder than plasti..
Model: TABB-008GD
Description:Upgrade part series for Tamiya's BB-01 chassis, upgrade stock parts to remove play and increase durability!..
Model: TABB-007GD
Brass King Pin 4pcs For Tamiya BBX (BB-01)..
Model: XV01-031
Yeah Racing Carbon Bumper Support For Tamiya FF-03 XV01 #XV01-031
Description:
Carbon support plate for Tamiya's FF-03 and XV01, more protection with an added layer of Carbon piece ontop of the foam bumper!..
Model: TATC-002
Description:Reduce the chassis flex due to the plastic tub with this front carbon stiffener! ..
Model: TATC-001
Description:Reduce the chassis flex due to the plastic tub with this carbon stiffening brace set! Comes in two pieces so you can fine tune the flex characteristics! ..
Model: TAMC-063
Yeah Racing Carbon Damper Stay Rear For Tamiya M05 #TAMC-063
Description:
Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficenc..
Model: TAMC-062
Description:
Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficency due to the shock tower not flexing!..
Model: TAMC-060
Yeah Racing Carbon Damper Stay Set For Tamiya M07 TRF Short Dampers #TAMC-060
Description:
Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more su..
Model: TATT-033
Description:Replacement part for the Competition Touring Car Upgrade Kit For Tamiya's TT02, keep spares to make sure your race day isn't cut short! ..
Model: TAMC-058
Yeah Racing Carbon Front Damper Stay for Tamiya M07 #TAMC-058
Description:
Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficen..
Model: TATT-024
Description:Carbon damper stay for Tamiya's TT02S and also Yeah Racing's Upgrade Kit TATT-S04! Strong and lightweight carbon for strengthening and improving your suspension's efficiency! ..
Model: TAMC-059
Yeah Racing Carbon Rear Damper Stay for Tamiya M07 #TAMC-059
Description:
Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficenc..
Model: TATT-025
Description:Carbon damper stay for Tamiya's TT02S and also Yeah Racing's Upgrade Kit TATT-S04! Strong and lightweight carbon for strengthening and improving your suspension's efficiency! ..
Model: TAV-015
Yeah Racing Carbon Steel Shaft For Tamiya Avante #TAV-015
Description:
Carbon Steel upgrade universals for Tamiya's 1/10 Avante, increasing durability to handle big off road jumps!..
Model: TASW-003
Yeah Racing Graphite Upper Arm Connectors For Tamiya SW-01 #TASW-003
Description:
Connect the front and rear upper arms to have steering control whilst popping a wheelie with your Tamiya SW-01! Simple installation with a screw onto each upper arm, made from Graphite for light weight!..
Model: TABB-016BK
Description:Delrin gears for your Tamiya cars to reinforce the drivetrain. Made from delrin ensures long lasting and perfect meshing gears...
Model: XV01-010
Upgrade Front belt for your car, made from strong and flexible material giving a more long lasting and efficicent drivetrain...
Model: TATA-004
Upgrade the entire belt for your TA07, made from strong and flexible material giving a more long lasting and efficient drivetrain...
Model: ER-0006
Yeah Racing E-Ring (E 4.0) 10pcs
Description:
This is the E-Ring (E 4.0).
Color: Black..
Model: ER-0003
Yeah Racing E-Ring 10pcs
Description:
This is the E-Ring
Color: Black..
Model: TATF-001
Yeah Racing Front & Rear Graphite Damper Mount For Tamiya Top Force #TATF-001
Description:
Graphite shock tower set for Tamiya's Top Force, increasing durability and stability over the standard stock part!
Material: Graphite
Color: Black..
Model: TT02-015
Yeah Racing Steel Universal Joint Shaft For Tamiya TT02 #TT02-015
Description:
This is a Yeah Racing Steel Universal joint Shaft For Tamiya TT02, a must have upgrade to replace the stock plastic parts for smoother and more direct acceleration and deceleration. The Shaft is made from lightweight yet..
Model: TATT-018
Yeah Racing G45 Steel Adjustable Universal Drive Shaft for TATT-S03 (Tamiya TT02 RWD) #TATT-018
Description:
Adjustable steel universals which allow you to run large trackwidths when using wide drift bodies without the need of keeping different lengths.
Made from strong G45 steel to deal with lar..
Model: TAWR-008V2
Yeah Racing G45 Steel Adjustable Steering Tie Rod Set For Yeah Racing TAWR-S01 #TAWR-008V2
Description:
One downfall of the original tierods of the original kit is that they are not adjustable. We saw that flaw and improved it by introducing adjustable turnbuckles for the entire car.
So you can ..
Model: TAMC-091BK
Description:High strength steel cups for use in your Tamiya Mini either the M05 or M06!..
Model: TATT-030
Description:Universal swing shafts are made from durable, high quality hardened G45 Steel which means a stronger drivetrain which will translate to better throttle response..
Model: TATT-018-3
Description:Optional steel outdrives to be used with the differential found on Tamiya's TT02! Made from durable G45 Steel will increase the lifespan of your outdrives and drivetrain!..